Thanks for buying the Glockenmaschine!
The Glockenmaschine consists of four types of layers:
1. The Glocken layers contain all the Glocken sounds.
2. The Transient layers offers sounds from piano keys. You can decide whether such a sound should play when you press a key, or when you release a key. For that press the 'Play On Release'-Button
3. The Atmo layer includes four background sounds that can be turned on and off by either using the button in the middle, or by pressing the violet keys C8 and C#8.
4. The Pedal layer has a selection of different piano pedals, triggered when pressing yourmidi pedal.
Some of the layers have sub-layers, so for example the Glocken layer has three sublayers.
The Glockenmaschine menu:
There are four menu tabs at the bottom.
Global Edit – Featuring a few controls affecting the whole instrument
Global FX – An FX section for the main output of the instrument
Layer Edit – Here you can change each sub-layer of all the four kinds of layers
Layer FX – An FX section for each sub-layer
Advanced controls:
Dynamic – Let's you control how much velocity affects the loudness of the notes.
Range Vol – Allows you to make higher notes louder than lower notes, or the other way around.
Release Off/On – Some sounds have release samples that you can turn off if you don't want them. If a sound doesn't have any release samples, the control appears dark grey.
Rel Vol – Let's you change the volume of the release samples.
Play On Release – For the Transient Layer. If on, the samples triggers when you release a note on the keyboard.
How to find the folder for the presets / snapshots
Click the wrench in the top left of the Glockenmaschine:
Click on 'Instrument Options': 
Click on 'Snapshot':
Click on the button that says 'Show':