Thanks for buying Ritual!

• Microphones
  The sliders on the left set the microphone volumes. If you click on the Name below ("Close","Room") you can unload the samples from memory.
  Small sliders above set the panning.
  
• PITCH
  Sets the pitch of the instrument in semitones. Unlike the pitch that comes with Kontakt, this pitching slider will account for the onset of the sample.
  
• RANDOM
  Sets the amount of random timedelay for each note.
• ONSET
  Sets the predelay for each note. Setting this close to 0 may cut off a part of the beginning fo the sample.
  
• ADSR
  Sets the Attack, Decay, Sustain and Release of the instrument.
  The "Close" and "Room" buttons below determine which microphone the ADSR is supposed to set. 

 

The menu to the very right lets you switch to other settings of the library:

VELOCITY

You can draw on the velocity matrix to change the velocity behaviour.
By default it is unchanged.
You can also use the sliders to change it.

 

RR MATRIX

The buttons show the amount of round robins for each dynamic. 
The low dynamics are at the top, the high dynamics at the bottom.
You can turn each round robin on and off.

SMART RR will add some variation to the round robin cycle.

MAPPING

• RANGE
  The numbers indicate the current playable area. 
  The outer arrows MOVE the playable area.
  The inner arrows increase or decrease the playable area.
  
• PITCH -> VEL
  Changes the keyboard layout, so that the dynamic is determined by how low or high you play.
  
• PITCH -> PAN
  Changes the keyboard layout, so that the panning is determined by how low or high you play.
  
• BLACK KEYS
  If enabled, only the black keys are playable.
• WHITE KEYS
  If enabled, only the white keys are playable.
• ALL KEYS
  If enabled, all keys are playable.